RSS feeds
РусскийEnglish
Issue 11, 2024
Volume year page
Issues Authors PACS Subscription For authors

Issues

 / 

2019

 / 

January

←  →

Instruments and methods of investigation


3D printing methods for micro- and nanostructures

,
Rzhanov Institute of Semiconductor Physics, Siberian Branch of the Russian Academy of Sciences, prosp. Lavrent'eva 13, Novosibirsk, 630090, Russian Federation

Physical and chemical fundamentals of three-dimensional (3D) micro- and nanoprinting are presented. 3D printing (or additive manufacturing technology) is a process which fabricates structures and devices by depositing material (usually, layer by layer) according to a 3D digital models. The methods and results reviewed here are limited to those from micro- and nanoscale fields that are in demand in the fields of electronics, photonics and bionics. Special attention is given to methods for fabricating sub-100-nm structures, including single- and two-photon polymerization stereolithography, electrohydrodynamic inkjet printing and laser-induced forward transfer. The advantages and disadvantages of 3D printing methods are discussed together with prospects for their development and application.

Fulltext pdf (1.1 MB)
Fulltext is also available at DOI: 10.3367/UFNe.2017.11.038239
Keywords: 3D printing, additive technologies, 3D nanostructures, stereolithography, two-photon polymerization, inkjet printing, electrohydrodynamic printing, laser-induced forward transfer
PACS: 32.80.Rm, 42.82.Cr, 61.46.−w, 68.65.−k, 81.20.−n (all)
DOI: 10.3367/UFNe.2017.11.038239
URL: https://ufn.ru/en/articles/2019/1/e/
000462478600004
2-s2.0-85065653282
2019PhyU...62...54F
Citation: Fritzler K B, Prinz V Ya "3D printing methods for micro- and nanostructures" Phys. Usp. 62 54–69 (2019)
BibTexBibNote ® (generic)BibNote ® (RIS)MedlineRefWorks

Received: 5th, June 2017, 10th, November 2017

Оригинал: Фрицлер К Б, Принц В Я «Методы трёхмерной печати микро- и наноструктур» УФН 189 55–71 (2019); DOI: 10.3367/UFNr.2017.11.038239

References (231) ↓ Cited by (31) Similar articles (13)

  1. "Standard Terminology for Additive Manufacturing Technologies" ASTM F2792-12a (West Conshohocken, PA: ASTM, 2012)
  2. Ren Z, Gao P-X Nanoscale 6 9366 (2014)
  3. Prinz V Ya Advances In Semiconductor Nanostructures (Eds A V Dvurechenskii, A L Aseev) (Amsterdam: Elsevier, 2017) p. 463
  4. Prinz V Ya et al Physica E 6 828 (2000)
  5. Prinz V Ya et al Sci. Technol. Adv. Mater. 10 034502 (2009)
  6. Bandyopadhyay A, Bose S (Eds) Additive Manufacturing (Boca Raton: CRC Press, 2015)
  7. Gibson I, Rosen D, Stucker B Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping And Direct Digital Manufacturing (New York: Springer, 2015)
  8. Magdassi S, Kamyshny A Nanomaterials For 2D And 3D Printing (New York: Wiley-VCH, 2017)
  9. Turner M D et al Nature Photon. 7 801 (2013)
  10. Gissibl T et al Nature Photon. 10 554 (2016)
  11. Kong Y L et al Nano Lett. 14 7017 (2014)
  12. Murphy S V, Atala A Nature Biotech. 32 773 (2014)
  13. Zhang Y S et al Ann. Biomed. Eng. 45 148 (2016)
  14. Duan B Ann. Biomed. Eng. 45 195 (2017)
  15. Mannoor M S et al Nano Lett. 13 2634 (2013)
  16. Hull C W U.S. Patent No. 4575330A (1986)
  17. Bártolo P J Stereolithography: Materials, Processes And Applications (New York: Springer, 2011)
  18. O’Neill P F et al Biomicrofluidics 8 052112 (2014)
  19. Zhou C et al Proc. of the Annual Solid Freeform Fabrication Symp., Austin, TX, 2011 p. 65
  20. Zhou C et al Rapid Prototyp. J. 19 153 (2013)
  21. Pan Y et al Proc. of the ASME 2012 Intern. Manufacturing Science and Engineering (New York: American Society of Mechanical Engineers, 2012) p. 405
  22. Gibson I, Rosen D W, Stucker B Additive Manufacturing Technologies. Rapid Prototyping To Direct Digital Manufacturing (London: Springer, 2010)
  23. Chatani S, Kloxin C J, Bowman C N Polymer Chem. 5 2187 (2014)
  24. Odian G Principles Of Polymerization (New York: McGraw-Hill, 1970); Per. na russk. yaz., Oudian D M Osnovy Polimernoi Khimii (M.: Mir, 1974)
  25. Mueller J B et al Adv. Mater. 26 6566 (2014)
  26. Andrzejewska E et al Phys. Chem. Chem. Phys. 5 2635 (2003)
  27. Abbe E Archiv Mikroskop. Anatomie 9 413 (1873)
  28. Maruo S, Nakamura O, Kawata S Opt. Lett. 22 132 (1997)
  29. Sugioka K, Cheng Y Ultrafast Laser Processing: From Micro- To Nanoscale (Singapore: Pan Stanford, 2013)
  30. Sugioka K, Cheng Y Appl. Phys. Rev. 1 041303 (2014)
  31. Röhrig M et al Small 8 3009 (2012)
  32. Deubel M et al Nature Mater. 3 444 (2004)
  33. Kawata S et al Nature 412 697 (2001)
  34. Zhou X, Hou Y, Lin J AIP Adv. 5 030701 (2015)
  35. Malinauskas M et al Lithuanian J. Phys. 52 312 (2012)
  36. Bückmann T et al Adv. Mater. 24 2710 (2012)
  37. Barton J H et al IEEE Trans. Antennas Propagation 62 3652 (2014)
  38. Barton J H et al Prog. Electromagn. Res. B 41 269 (2012)
  39. Digaum J L et al Opt. Express 22 25788 (2014)
  40. Williams H E et al Opt. Express 19 22910 (2011)
  41. Haske W et al Opt. Express 15 3426 (2007)
  42. Gissibl T et al Nature Commun. 7 11763 (2016)
  43. Grossmann T et al Opt. Express 19 11451 (2011)
  44. Malinauskas M et al J. Opt. 12 124010 (2010)
  45. Rekčtyte S et al Opt. Express 21 17028 (2013)
  46. Raimondi M et al Micromachines 5 341 (2014)
  47. Malinauskas M et al Micromachines 5 839 (2014)
  48. Herkommer A M J. Opt. 43 261 (2014)
  49. Liberale C et al IEEE Photon. Technol. Lett. 22 474 (2010)
  50. Malinauskas M et al J. Opt. 12 035204 (2010)
  51. Žukauskas A et al J. Laser Micro Nanoeng. 9 68 (2014)
  52. Gissibl T, Schmid M, Giessen H Optica 3 448 (2016)
  53. Lindenmann N et al Opt. Express 20 17667 (2012)
  54. Žukauskas A et al Proc. SPIE 8428 84280K (2012)
  55. Xing J-F et al Appl. Phys. Lett. 90 131106 (2007)
  56. Pikulin A, Bityurin N Phys. Rev. B 75 195430 (2007)
  57. Pikulin A V, Bityurin N M Zh. Tekh. Fiz. 82 (5) 120 (2012); Pikulin A V, Bityurin N M Tech. Phys. 57 697 (2012)
  58. Klar T A, Wollhofen R, Jacak J Phys. Scripta 2014 014049 (2014)
  59. Fischer J, Wegener M Laser Photon. Rev. 7 22 (2013)
  60. Scott T F et al Science 324 913 (2009)
  61. Harke B et al Adv. Mater. 25 904 (2013)
  62. Fischer J, Wegener M Opt. Mater. Express 1 614 (2011)
  63. Wolf T J A et al Opt. Lett. 36 3188 (2011)
  64. Andrew T L, Tsai H-Y, Menon R Science 324 917 (2009)
  65. Cantu P, Andrew T L, Menon R Appl. Phys. Lett. 105 193105 (2014)
  66. Cantu P et al Appl. Phys. Lett. 100 183103 (2012)
  67. Majumder A et al AIP Adv. 6 065312 (2016)
  68. Menon R, Smith H I J. Opt. Soc. Am. A 23 2290 (2006)
  69. Sakellari I et al ACS Nano 6 2302 (2012)
  70. Maruo S, Ikuta K Appl. Phys. Lett. 76 2656 (2000)
  71. Thiel M et al Appl. Phys. Lett. 97 221102 (2010)
  72. Fischer J et al Opt. Express 21 26244 (2013)
  73. Malinauskas M, Danilevičius P, Juodkazis S Opt. Express 19 5602 (2011)
  74. Baldacchini T, Snider S, Zadoyan R Opt. Express 20 29890 (2012)
  75. Fischer J, von Freymann G, Wegener M Adv. Mater. 22 3578 (2010)
  76. Nielson R, Kaehr B, Shear J B Small 5 120 (2009)
  77. Ritschdorff E T, Nielsona R, Shear J B Lab Chip 12 867 (2012)
  78. Dong X-Z, Zhao Z-S, Duan X-M Appl. Phys. Lett. 91 124103 (2007)
  79. Kato J et al Appl. Phys. Lett. 86 044102 (2005)
  80. Salter P S, Booth M J Opt. Lett. 36 2302 (2011)
  81. Formanek F et al Opt. Express 14 800 (2006)
  82. Stankevicius E et al J. Micromech. Microeng. 22 065022 (2012)
  83. Smith H I et al J. Phys. Conf. Ser. 415 012037 (2013)
  84. Matsuo S, Juodkazis S, Misawa H Appl. Phys. A 80 683 (2005)
  85. Hasegawa S, Hayasaki Y Opt. Express 21 12987 (2013)
  86. Hayasaki Y et al Appl. Phys. Lett. 87 031101 (2005)
  87. Takahashi H et al Opt. Express 16 16592 (2008)
  88. Vizsnyiczai G, Kelemen L, Ormos P Opt. Express 22 24217 (2014)
  89. Yang L et al Opt. Lasers Eng. 70 26 (2015)
  90. Obata K et al Opt. Express 18 17193 (2010)
  91. Kuang Z et al Appl. Surf. Sci. 255 2284 (2008)
  92. Tumbleston J R et al Science 347 1349 (2015)
  93. Derby B Annu. Rev. Mater. Res. 40 395 (2010)
  94. Suganuma K Introduction To Printed Electronics (New York: Springer, 2014)
  95. de Gans B-J, Duineveld P C, Schubert U S Adv. Mater. 16 203 (2004)
  96. Fuh J et al Handbook Of Manufacturing Engineering And Technology (Ed. A Y C Nee) (London: Springer-Verlag, 2015) p. 2567
  97. Antonova I V Usp. Fiz. Nauk 187 220 (2017); Antonova I V Phys. Usp. 60 204 (2017)
  98. Kamyshny A, Steinke J, Magdassi S Open Appl. Phys. J. 4 19 (2011)
  99. Magdassi S The Chemistry Of Inkjet Inks (Singapore: World Scientific, 2010)
  100. Smith P J et al Inkjet-Based Micromanufacturing (Advanced Micro and Nanosystems) Vol. 9 (Eds J G Korvink, P J Smith, D-Y Shin) (Weinheim: Wiley-VCH, 2012)
  101. Brand O et al Inkjet-Based Micromanufacturing (Advanced Micro and Nanosystems) Vol. 9 (Eds J G Korvink, P J Smith, D-Y Shin) (Weinheim: Wiley-VCH, 2012)
  102. Gan H Y et al J. Micromech. Microeng. 19 055010 (2009)
  103. Ikegawa MAzuma H JSME Int. J. B 47 490 (2004)
  104. Fromm J E IBM J. Res. Development 28 322 (1984)
  105. McKinley G H Rheology Bull. 74 6 (2005)
  106. Popov Yu O Phys. Rev. E 71 036313 (2005)
  107. Deegan R D et al Nature 389 827 (1997)
  108. Deegan R D Phys. Rev. E 61 475 (2000)
  109. Deegan R D et al Phys. Rev. E 62 756 (2000)
  110. Shen X, Ho C-M, Wong T-S J. Phys. Chem. B 114 5269 (2010)
  111. Park J, Moon J Langmuir 22 3506 (2006)
  112. de Gans B-J, Schubert U S Langmuir 20 7789 (2004)
  113. Lim J A et al Adv. Function. Mater. 18 229 (2008)
  114. Kajiya T et al J. Phys. Chem. B 113 15460 (2009)
  115. Prinz A V, Prinz V Ya, Seleznev V A Microelectron. Eng. 67-68 782 (2003)
  116. Ahn B Y et al Science 323 1590 (2009)
  117. Noh Y-Y et al Nature Nanotechnol. 2 784 (2007)
  118. Zhao N et al J. Appl. Phys. 101 064513 (2007)
  119. Kullmann C et al J. Micromech. Microeng. 22 055022 (2012)
  120. Kamyshny A, Magdassi S Small 10 3515 (2014)
  121. Nebogatikova N A et al Phys. Chem. Chem. Phys. 17 13257 (2015)
  122. Perelaer J et al Adv. Mater. 21 4830 (2009)
  123. Perelaer J et al Adv. Mater. 24 2620 (2012)
  124. Ko S H et al Appl. Phys. Lett. 90 141103 (2007)
  125. Kang H, Sowade E, Baumann R R ACS Appl. Mater. Interfaces 6 1682 (2014)
  126. Allen M L et al Nanotechnology 19 175201 (2008)
  127. Reinhold I et al J. Mater. Chem. 19 3384 (2009)
  128. Grouchko M et al ACS Nano 5 3354 (2011)
  129. Reiser B et al Chem. Sci. 7 4190 (2016)
  130. Park J-U et al Nature Mater. 6 782 (2007)
  131. Park J-U et al Nano Lett. 10 584 (2010)
  132. Onses M S et al Small 11 4237 (2015)
  133. Zheng G et al "Direct-write micro/nano-structure for flexible electronic manufacturing" 7th IEEE Conf. on Nanotechnology, IEEE NANO, 2-5 August 2007
  134. Taylor G, Van Dyke M D Proc. R. Soc. Lond. A 313 453 (1969)
  135. Dalton P D et al Biomater. Sci. 1 171 (2013)
  136. Brown N A, Gladstone J N, Chiarot P R J. Micro Nano-Manuf. 3 014502 (2015)
  137. An B W et al Adv. Mater. 27 4322 (2015)
  138. Richner P et al ACS Photon. 3 754 (2016)
  139. Galliker P et al Nature Commun. 3 890 (2012)
  140. Schneider J et al Adv. Function. Mater. 26 833 (2016)
  141. Han Y, Wei C, Dong J Manufact. Lett. 2 96 (2014)
  142. Hansen C J et al Adv. Mater. 25 96 (2013)
  143. Sutanto E et al J. Micromech. Microeng. 22 045008 (2012)
  144. Sutanto E et al Manufact. Lett. 2 4 (2014)
  145. Lee J-S et al Appl. Phys. Lett. 93 243114 (2008)
  146. Lee K I et al Proc. of the IEEE 26th Intern. Conf. on Micro Electro Mechanical Systems, MEMS 2013, January 20-24, 2013, Taipei, Taiwan (Piscataway, NJ: IEEE, 2013) p. 1165
  147. Coppola S et al Proc. SPIE 9705 97050L (2016)
  148. Ferraro P et al Nature Nanotechnol. 5 429 (2010)
  149. Vespini V et al Lab Chip 16 326 (2016)
  150. de Angelis M et al Appl. Phys. Lett. 103 163112 (2013)
  151. Tagawa Y et al Phys. Rev. X 2 031002 (2012)
  152. Moser C et al Proc. SPIE 9764 97641D (2016)
  153. Kim J T et al ACS Macro Lett. 1 375 (2012)
  154. Kim J T et al Adv. Mater. 23 1968 (2011)
  155. Jung S et al Adv. Energy Mater. 4 1400432 (2014)
  156. Azzellino G et al Adv. Mater. 25 6829 (2013)
  157. Fukuda K et al Nature Commun. 5 4147 (2014)
  158. Xu W et al Adv. Mater. 28 527 (2016)
  159. Blattmann M et al Opt. Express 23 24525 (2015)
  160. Chen W-C et al J. Micromech. Microeng. 23 065008 (2013)
  161. Liu X et al Nature Commun. 5 4007 (2014)
  162. Sutanto E, Alleyne A Mechatronics 31 243 (2015)
  163. Søndergaard R R, Hösel M, Krebs F C J. Polymer Sci. B 51 16 (2013)
  164. Visser C W et al Adv. Mater. 27 4087 (2015)
  165. Wang J et al Adv. Mater. 22 4462 (2010)
  166. Zenou M, Kotler Z Opt. Express 24 1431 (2016)
  167. Banks D P et al Appl. Phys. Lett. 89 193107 (2006)
  168. ’t Veld B H et al CIRP Ann. 64 701 (2015)
  169. Wu P K et al Thin Solid Films 398-399 607 (2001)
  170. Arnold C et al Laser Focus World 40 S9 (2004)
  171. Pique A et al Proc. SPIE 5662 564 (2004)
  172. Munoz-Martin D et al Appl. Surf. Sci. 366 389 (2016)
  173. Willis D A, Grosu V Appl. Phys. Lett. 86 244103 (2005)
  174. Sametoglu V, Sauer V T K, Tsui Y Y Opt. Express 21 18525 (2013)
  175. Hennig G et al J. Laser Micro Nanoeng. 7 289 (2012)
  176. Sridhar A et al Proc. of the IEEE 62nd Electronic Components and Technology Conf., San Diego, CA, USA (Piscataway, NJ: IEEE, 2012)
  177. Nguyen A K, Narayan R J Ann. Biomed. Eng. 45 84 (2017)
  178. Arnold C B, Serra P, Piqué A MRS Bull. 32 23 (2007)
  179. Constantinescu C et al Appl. Surf. Sci. 374 49 (2016)
  180. Nagel M et al Appl. Phys. A 92 781 (2008)
  181. Shaw-Stewart J et al Appl. Surf. Sci. 258 9309 (2012)
  182. Brown M S et al J. Fluid Mech. 709 341 (2012)
  183. Kattamis N T, Brown M S, Arnold C B J. Mater. Res. 26 2438 (2011)
  184. Kuznetsov A I, Koch J, Chichkov B N Opt. Express 17 18820 (2009)
  185. Korte F, Koch J, Chichkov B N Appl. Phys. A 79 879 (2004)
  186. Makrygianni M et al Appl. Surf. Sci. 297 40 (2014)
  187. Zywietz U et al Appl. Phys. A 114 45 (2014)
  188. Zywietz U et al Nature Commun. 5 3402 (2014)
  189. Feinaeugle M et al Appl. Phys. A 122 398 (2016)
  190. Auyeung R C Y et al Appl. Phys. A 102 21 (2011)
  191. Auyeung R C Y et al Opt. Express 23 422 (2015)
  192. Piqué A et al Proc. SPIE 8608 86080K (2013)
  193. Dong L, Arai F, Fukuda T Appl. Phys. Lett. 81 1919 (2002)
  194. Madsen D N et al Nano Lett. 3 47 (2003)
  195. Yokota T, Murayama M, Howe J M Phys. Rev. Lett. 91 265504 (2003)
  196. Xu S et al Small 1 1221 (2005)
  197. De Angelis F et al Nanoscale 3 2689 (2011)
  198. Esposito M et al ACS Photon. 2 105 (2015)
  199. Esposito M et al Adv. Opt. Mater. 2 154 (2014)
  200. Jesse S et al ACS Nano 10 5600 (2016)
  201. Sezen M Modern Electron Microscopy In Physical And Life Sciences (Ed. M Janecek) (London: IntechOpen, 2016) p. 1624
  202. Vaezi M, Seitz S, Yang S Int. J. Adv. Manufact. Technol. 67 1721 (2013)
  203. Sugimoto Y et al Nature Mater. 4 156 (2005)
  204. Custance O, Perez R, Morita S Nat"ure Nanotechnol. 4 803 (2009)
  205. Gohlke D et al Nano Lett. 13 2418 (2013)
  206. Olyanich D A et al Nanotechnology 24 055302 (2013)
  207. Morgenstern K, Lorente N, Rieder K-H Phys. Status Solidi B 250 1671 (2013)
  208. Eigler D M, Schweizer E K Nature 344 524 (1990)
  209. Junno T et al Appl. Phys. Lett. 66 3627 (1995)
  210. Carlson M B et al 3D Print. Additive Manufact. 2 123 (2015)
  211. Fan Z et al Carbon 86 280 (2015)
  212. Tao X Y et al Diamond Related Mater. 15 1271 (2006)
  213. Dong L et al Nano Lett. 9 210 (2009)
  214. Dong L et al IEEE Nanotechnol. Mag. 4 13 (2010)
  215. Kitaura R et al Angew. Chem. Int. Ed. 48 8298 (2009)
  216. Hengsbach S, Lantada A D Biomed. Microdev. 16 617 (2014)
  217. Obata K et al J. Laser Micro Nanoeng. 9 242 (2014)
  218. Seleznev V A, Prinz V Ya Nanotechnology 28 064004 (2017)
  219. Prinz V Ya et al Sci. Rep. 7 43334 (2017)
  220. Huang Y et al J. Manuf. Sci. Eng. 137 014001 (2015)
  221. Dezhina I G i dr Novye Proizvodstvennye Tekhnologii. Publichnyi Analiticheskii Doklad (M.: Delo, 2015)
  222. Shanler M, Basiliere P "Hype Cycle for 3D Printing, 2015, Accessed 01.04.17, 2017" https://www.gartner.com/doc/3100228
  223. Ortiz A M et al IEEE Internet Things J. 1 206 (2014)
  224. Park M et al Adv. Healthcare Mater. 4 991 (2015)
  225. Honda W et al Adv. Funct. Mater. 24 3299 (2014)
  226. Yazdi A A et al Microfluid. Nanofluid. 20 50 (2016)
  227. Cusano A et al (Eds) Lab-on-Fiber Technology (Wiesbaden: Springer, 2015)
  228. Kong Y L et al Nano Today 11 330 (2016)
  229. Xu L D, He W, Li S IEEE Trans. Industrial Inform. 10 2233 (2014)
  230. Rosa P, Câmara A, Gouveia C Open J. Internet Things 1 16 (2015)
  231. Whitmore A, Agarwal A, Xu L D Inf. Syst. Front. 17 261 (2015)
© 1918–2024 Uspekhi Fizicheskikh Nauk
Email: ufn@ufn.ru Editorial office contacts About the journal Terms and conditions