RSS feeds
РусскийEnglish
Issue 4, 2024
Volume year page
Issues Authors PACS Subscription For authors

Issues

 / 

2005

 / 

May

←  →



Modification of material properties and coating deposition using plasma jets

 a, b,  c
b Kurdyumov Institute for Metal Physics, National Academy of Sciences of Ukraine, Vernadsky blvd. 36, Kyiv, 03680, Ukraine
c Institut elektrosvarki im. E.O. Patona Natsional'noi Akademii Nauk Ukrainy, Kiev, Ukraine

The review is concerned with the current status of research on the use of plasma jets for the modification of surface properties of metalware, as well as of investigations of doping and mass transfer of elements. The effect of thermal plasma parameters on the efficiency of surface processing of metal materials is discussed. The structure and properties of protective coatings produced by exposure to pulsed plasmas are analyzed. A new direction for the production of combined coatings is considered. Their structure and properties were studied by the example of Fe, Cu, steels, and alloys, including titanium alloys; the modification process was shown to be controllable by the action of pulsed plasma jets. The physical factors that affect the modification process and the coating deposition, and their effect on the structure and properties of metallic, ceramic- metal, and ceramic coatings were analyzed.

Fulltext pdf (1.7 MB)
Fulltext is also available at DOI: 10.1070/PU2005v048n05ABEH002055
PACS: 52.77.−j, 81.15.−z, 81.65.−b, 82.45.Bb (all)
DOI: 10.1070/PU2005v048n05ABEH002055
URL: https://ufn.ru/en/articles/2005/5/d/
000231918300004
2005PhyU...48..487P
Citation: Pogrebnyak A D, Tyurin Yu N "Modification of material properties and coating deposition using plasma jets" Phys. Usp. 48 487–514 (2005)
BibTexBibNote ® (generic)BibNote ® (RIS)MedlineRefWorks

Оригинал: Погребняк А Д, Тюрин Ю Н «Модификация свойств материалов и осаждение покрытий с помощью плазменных струй» УФН 175 515–544 (2005); DOI: 10.3367/UFNr.0175.200505e.0515

References (97) ↓ Cited by (71)

  1. Smith R W, Novak R Powder Metall. Int. 23 147 (1991)
  2. Smith R W, Novak R Powder Metall. Int. 23 231 (1991)
  3. Pober R, Abbott R Am. Ceram. Soc. Bull. 73 (2) 45 (1994)
  4. Boulos M J. Thermal Spray Technol. 1 33 (1992)
  5. Steffens H-D, Babiak Z, Wewel M IEEE Trans. Plasma Sci. 18 974 (1989)
  6. Thorpe M L Adv. Mater. Process. 134 (4) 69 (1988)
  7. Marantz David R, Marantz Daniel R in Thermal Spray Research and Applications: Proc. of the 3rd National Thermal Spray Conf., Long Beach, Calif., USA, 20 - 25 May 1990 (Ed. T F Bernecki) (Materials Park, OH: ASM Intern., 1991) p. 113
  8. Sampson E, Nieder L in Thermal Spray Coatings: Research, Design, and Applications: Proc. of the 5th National Thermal Spray Conf., June 7 - 11, 1993, Anaheim, Calif., USA (Eds C C Berndt, T F Bernecki) (Materials Park, OH: ASM Intern., 1993) p. 251
  9. Sampson E in Thermal Spray Coatings: Research, Design, and Applications: Proc. of the 5th National Thermal Spray Conf., June 7 - 11, 1993, Anaheim, Calif., USA (Eds C C Berndt, T F Bernecki) (Materials Park, OH: ASM Intern., 1993) p. 257
  10. Wang X et al. in Advances in Thermal Spray Science and Technology: Proc. of the 8th National Thermal Spray Conf., 11 - 15 September, 1995, Houston, Texas, USA (Eds C C Berndt, S Sampath) (Materials Park, OH: ASM Intern., 1995) p. 31
  11. Heberlein J, Pfender E Mater. Sci. Forum 140/141 477 (1993)
  12. Ohtake N, Yoshikawa M J. Electrochem. Soc. 137 717 (1990)
  13. Ohtake N et al. in Applications of Diamond Films and Related Materials: Proc. of the 1st Intern. Conf., ADC’91, Auburn, Alabama, USA, August 17 - 22, 1991 (Eds Y Tzeng et al.) (Amsterdam: Elsevier, 1991) p. 431
  14. Pfender E et al. Diamond Relat. Mater. 1 127 (1992)
  15. Yoshida T et al. J. Appl. Phys. 54 640 (1983)
  16. Kumar A, Roy R J. Mater. Res. 3 1373 (1989)
  17. Kong P, Pfender E in Ceramic Powdes Processing Science: Proc. of the 2nd Intern. Conf., Berchtesgaden, Bavaria, FRG, October 12 - 14, 1988 (Eds H Hausner, G L Messing, S Mirano) (Köln: Deutsche Keramische Gesellschaft, 1989)
  18. Kong P, Pfender E In Combustion And Plasma Synthesis Of High-Temperature Materials (Eds Z A Munir, J B Holt) (New York: VCH, 1990) p. 420
  19. Kong P et al. In Better Ceramics Through Chemistry IV (Mater. Res. Soc. Symp. Proc., Vol. 180, Eds B J J Zelinski Et Al.) (Pittsburgh, Pa.: Materials Res. Soc., 1990) p. 849
  20. Or T et al. In Plasma Processing And Synthesis Of Materials III (Mater. Res. Soc. Symp. Proc., Vol. 190, Eds D Apelian, J Szekely) (Pittsburgh, Pa.: Materials Res. Soc., 1991) p. 83
  21. Zhu H, Lau Y, Pfender E In LOOKRF Plasma Synthesis Of YBa2Cu7-x Powders Using A Liquid Injection Method O Talk Summaries, Electronics Division, Presented At The 91st Annual Meeting Of The American Ceramic Society (Ed. K M Nair) (Indianapolis: American Ceramic Society, 1989) p. 173
  22. Kong P, Pfender E In LOOKRF Plasma Synthesis Of YBa2Cu7-x Powders Using A Liquid Injection Method O Talk Summaries, Electronics Division, Presented At The 91st Annual Meeting Of The American Ceramic Society (Ed. K M Nair) (Indianapolis: American Ceramic Society, 1989) p. 378
  23. Terashima K, Yoshida T, Akashi K Jpn. Symp. Plasma Chem. 8 (3) 157 (1988)
  24. Ono T et al. Plasma Chem. Plasma Process. 7 (2) 201 (1987)
  25. Zu H, Lau Y, Pfender E In ISPC-9: Intern. Symp. On Plasma Chemistry, Pughochiuso, Italy, 1989 (Ed. R D Agostino) (Bari: Univ. of Bari, 1989) p. 1497
  26. Kong P, Pfender E In Non-Oxide Ceramic Engineering (Eds A W Weimer, W Rafaniello) (London: Chapman and Hall), in press
  27. Siegel R W Mater. Sci. Eng. A 168 189 (1993)
  28. Grishick S L, Chiu C-P J. Plasma Chem. Plasma Process. 9 355 (1989)
  29. Rao N et al. Plasma Chem. Plasma Process. 15 581 (1995)
  30. Boulos M, Pfender E MRS Bull. 21 (8) 65 (1996)
  31. Tyurin Y N, Pogrebnjak A D Surf. Coat. Technol. 111 269 (1999)
  32. Pogrebnyak A D i dr. Pis’ma ZhTF 26 (21) 53 (2000)
  33. Pogrebnyak A D i dr. Zh. Tekh. Fiz. 71 (7) 111 (2001)
  34. Lebedev A D, Uryukov B A Impul’snye Uskoriteli Plazmy Vysokogo Davleniya (Novosibirsk: In-t teplofiziki SO AN SSSR, 1990) p. 280
  35. Uglum J R et al. ASM Thermal Spray Soc. 7 373 (1997)
  36. Bhagat R B et al. ASM Thermal Spray Soc. 7 361 (1997)
  37. Pogrebnjak A D et al. Vacuum 62 21 (2001)
  38. Pogrebnjak A D, Kul’ment’eva O P, Tyurin Yu N in New Electrical and Electronic Technologies and Their Industrial Implementation, NEET-2001: II Intern. Symp., 14 - 17 February 2001, Lublin, Poland (Ed. K Dolny) (Lublin: Lublin Univ. of Technology, 2001) p. 119
  39. Tyurin Yu N "Sposob detonatsionnogo naneseniya" Avt. svid. SSSR №1045491 (1983)
  40. Kharlamov Yu A "Detonatsionno-gazovye ustanovki dlya naneseniya pokrytii" Dep. v UkrNIINTI 25.08.88, №2102-UK88 (Voroshilovgrad, 1988) p. 22
  41. Pogrebnyak A D i dr. Metallofiz. Noveishie Tekhnologii (2005), v pechati
  42. Pogrebnyak A D i dr. Fiz.-khim. Osnovy Materialoved. (1) 35 (2005)
  43. Zhadkevich M L i dr. Probl. Metallurgii, Svarki Materialoved. (3(5)) 24 (2004)
  44. Pogrebnyak A D i dr. Pis’ma ZhTF (2005), v pechati
  45. Pogrebnyak A D i dr. Fiz. Inzheneriya Poverkhnosti (Khar’kov) 1 (34) 52 (2003)
  46. Heath G R, Dumola R J in Thermal Spray: Meeting the Challenges of the 21st Century: Proc. of the 15th Intern. Thermal Spray Conf., 25 - 29 May 1998, Nice, France (Ed. C Coddet) (Materials Rark, OH: ASM Intern., 1998) p. 1495
  47. Miyamoto M, Sakutatu T, Tago M in Thermal Spray: Meeting the Challenges of the 21st Century: Proc. of the 15th Intern. Thermal Spray Conf., 25 - 29 May 1998, Nice, France (Ed. C Coddet) (Materials Rark, OH: ASM Intern., 1998) p. 1501
  48. Thorpe M L, Richter H J in Thermal Spray: Intern. Advances in Coatings Technology: Proc. of the Intern. Thermal Spray Conf., 28 May - 5 June 1992, Orlando, Fl., USA (Materials Park, OH: ASM Inter., 1992) p. 137
  49. Tyurin Yu N Avtomaticheskaya Svarka (5) 13 (1999)
  50. Lebedev A D, Uryukov B A Uskoriteli Plazmy Vysokogo Davleniya (Novosibirsk, 1995) p. 210
  51. Pogrebnyak A D v sb. Plenki i pokrytiya — 2001: Trudy 6-i Mezhdunarodnoi konf., 3 - 5 aprelya, 2001, Sankt-Peterburg (Pod red. V S Klubnikina) (SPb.: Izd-vo SPbGTU, 2001) p. 56
  52. Tyurin Yu N v sb. Plenki i pokrytiya — 2001: Trudy 6-i Mezhdunarodnoi konf., 3 - 5 aprelya, 2001, Sankt-Peterburg (Pod red. V S Klubnikina) (SPb.: Izd-vo SPbGTU, 2001) p. 71
  53. Pogrebnyak A D, Tyurin Yu N, Kobzev A P Pis’ma ZhTF 27 (15) 1 (2001)
  54. Pogrebnyak A D i dr. Fiz.-khim. Osnovy Materialoved. (4) 47 (2001)
  55. Belikova A F i dr. Fiz.-khim. Osnovy Materialoved. (9) 100 (1989)
  56. Pogrebnyak A D et al. in New Electrical and Electronic Technologies and Their Industrial Implementation, NEET-2001: II Intern. Symp., 14 - 17 February 2001, Lublin, Poland (Ed. K Dolny) (Lublin: Lublin Univ. of Technology, 2001) p. 51
  57. Pogrebnyak A D i dr. Pis’ma ZhTF 30 (4) 78 (2004)
  58. Pogrebnjak A D et al. v sb. Plenki i pokrytiya — 2001: Trudy 6-i Mezhdunarodnoi konf., 3 - 5 aprelya, 2001, Sankt-Peterburg (Pod red. V S Klubnikina) (SPb.: Izd-vo SPbGTU, 2001) p. 324
  59. Pogrebnyak A D i dr. v sb. Plenki i pokrytiya — 2001: Trudy 6-i Mezhdunarodnoi konf., 3 - 5 aprelya, 2001, Sankt-Peterburg (Pod red. V S Klubnikina) (SPb.: Izd-vo SPbGTU, 2001) p. 82
  60. Pogrebnyak A D i dr. Fiz. Met. Metalloved. (5) 45 (2004)
  61. Pogrebnjak A D et al. in 6th Intern. Symp. Sputtering & Plasma Processes, ISSP 2001, Kanazawa, Japan, June 13 - 15 2001 (Kanazawa, 2001) p. 92
  62. Yuschenko K A, Borisov Y S, Tuyrin Yu N "Method and device for plasma-detonation working of metal articles" European Patent No. 0531527 Al. (1991)
  63. Voss A et al. Thin Solid Films 220 116 (1992)
  64. Gavrilebko T P, Nikolaev Y A, Ulianitsky V Y in Thermal Spray: Meeting the Challenges of the 21st Century: Proc. of the 15th Inter. Thermal Spray Conf., 25 - 29 May 1998, Nice, France (Ed. C Coddet) (Materials Rark, OH: ASM Intern., 1998) p. 1485
  65. Lugscheider E, Oberlander B C Sci. Rev. 88 (5) 283 (1991)
  66. Modelling Of Laser Hard-Facing Of Steels With Carbide Powder Injection (BRITE/EURAM Programme) (Luxemb.: OOPEC, 1990) p. 337
  67. Pogrebnyak A D i dr. Pis’ma ZhTF 29 (24) 35 (2003)
  68. Pogrebnjak A D et al. in New Electrical and Electronic Technologies and Their Industrial Implementation: III Intern. Symp., Zakopane, Poland, May 13 - 16, 2003 (Lublin: Lublin Univ. of Technology, 2003) p. 154
  69. Pogrebnjak A D et al. in New Electrical and Electronic Technologies and Their Industrial Implementation: III Intern. Symp., Zakopane, Poland, May 13 - 16, 2003 (Lublin: Lublin Univ. of Technology, 2003) p. 157
  70. Rej D J et al. Nucl. Instrum. Meth. B 127/128 987 (1997)
  71. Pogrebnyak A D i dr. Fiz.-khim. Osnovy Materialoved. (2005), v pechati
  72. Klimenov V A i dr. Fiz.-khim. Osnovy Materialoved. (6) 68 (1997)
  73. Pogrebnyak A D i dr. Metallofiz. Noveishie Tekhnologii 25 1329 (2003)
  74. Pogrebnjak A D, Ruzimov Sh M Phys. Lett. A 120 259 (1987)
  75. Pogrebnjak A D et al. Phys. Lett. A 123 410 (1987)
  76. Nakagawa Y et al. Jpn. J. Appl. Phys. 27 L719 (1988)
  77. Nakagawa Y et al. Nucl. Instrum. Meth. B 39 603 (1989)
  78. Ivanov Yu F, Lykov S V, Rotshtein V P Fiz.-khim. Osnovy Materialoved. (5) 62 (1993)
  79. Yatsui K et al. in Proc. of the 10th Intern. Conf. "High Power Particle Beams", San-Diego, USA, June 16 - 25, 1994 (San Diego, 1994) p. 27
  80. Davis H A et al. MRS Bull. 21 58 (1996)
  81. Davis H A et al. Mater. Chem. Phys. 54 213 (1998)
  82. Proskurovsky D I et al. Vac. Sci. Technol. A 16 2480 (1998)
  83. Misaelides P et al. Surf. Coat. Technol. 180 - 181 290 (2004)
  84. Tyurin Yu N, Pogrebnyak A D Surf. Coat. Technol. 142 - 144 293 (2001)
  85. Gertsriken D S, Mazanko V F, Fal’chenko V M Impul’snaya Obrabotka i Massoperenos v Metallakh pri Nizkikh Temperaturakh (Kiev: Naukova dumka, 1991)
  86. Tyurin Yu N, Kolisnichenko O V, Tsygankov N G Avtomaticheskaya Svarka (1) 38 (2001)
  87. Misaelides P et al. Nucl. Instrum. Meth. B (2005), in press
  88. Pogrebnjak A D et al. in Proc. of the 7th Intern. Conf. on Modification of Materials with Particle Beams and Plasma Flows, 25 - 27 July 2004, Tomsk, Russia (Tomsk, 2004) p. 417
  89. Itin V I et al. in Proc. of the 3rd Intern. Conf. "Energy Pulse and Particle Beam Modification of Materials", September 4 - 8 1989, Dresden, GDR (Phys. Res., Vol. 13, Eds K Hohmuth, E Richter) (Berlin: Akademie Verlag, 1990); Itin V I et al. Surf. Coat. Technol. 142 - 144 293 (2001)
  90. Valyaev A N, Kishimoto N, Pogrebnyak A D Modifikatsiya Svoistv Materialov i Sintez Tonkikh Plenok pri Obluchenii Intensivnymi Elektronnymi Ionnymi Puchkami (Ust’-Kamenogorsk: Vostochno-Kazakhstanskii tekhnicheskii universitet, 2000) p. 345
  91. Boiko V I i dr. Fiz.-khim. Osnovy Materialoved. (1) 29 (1992)
  92. Boiko V I i dr. Fiz.-khim. Osnovy Materialoved. (5) 28 (1993)
  93. Zhadkevich M L i dr. Probl. Metallurgii, Svarki Materialoved. (1(3)) 26 (2004)
  94. Zhetbaev A K i dr. Fazovye Preobrazovaniya v Implantatsionnykh Sistemakh Metall - Metalloid (Alma-Aty: Gylym, 1995) p. 182
  95. Pogrebnyak A D, Tyurin Yu N Usp. Fiz. Metallov 4 1 (2003)
  96. Prokhorov A M v Sb. Nauchnye Osnovy Progressivnoi Tekhnologii (Pod red. V N Lymzina) (M.: Mashinostroenie, 1982) p. 164
  97. Boiko V I, Valyaev A N, Pogrebnyak A D Usp. Fiz. Nauk 169 1243 (1999); Boiko V I, Valyaev A N, Pogrebnyak A D Phys. Usp. 42 1139 (1999)
© 1918–2024 Uspekhi Fizicheskikh Nauk
Email: ufn@ufn.ru Editorial office contacts About the journal Terms and conditions